 |
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following:
1. Dual-processor Quad & Dual Core
Intel® 64-bit Xeon® Support,
667 / 1066 / 1333MHz FSB
2. Up to 32GB DDR2 667 & 533 SDRAM
Fully Buffered DIMM (FB-DIMM)
3. 1 (x8) PCI-Express
5. 2x Intel® (ESB2/Gilgal) 82563EB
Dual-port Gigabit Ethernet Controller
6. 2x Hot-swap SATA Drive Bays
7. 900/980W High-efficiency
Power Supply
|
|
|
|
| |
| SYS-6015T-TV |
- SuperServer 6015T-TV (Silver)
|
| SYS-6015T-TB |
- SuperServer 6015T-TB (Black)
|
| |
| |
Super X7DBT + Super X7DBT |
| |
| |
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit
Xeon® processor(s) of the same
type below:
- Quad-Core Intel®
Xeon®Processor 5300
sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz
|
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| |
| |
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| |
| Chipset |
- Intel® 5000P (Blackford) chipset
- MCH + ESB2
|
| SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0, v.1.5
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
|
| Network Controllers |
- 2x Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
| |
| Serial ATA |
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- Total 4 USB 2.0 Compliant
|
| VGA |
|
| Serial Port |
- 1 Fast UART 16550 serial port
|
| |
|
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
| |
| Hot-swap |
- 2x 3.5" SATA Hot-swap drive bays
|
| |
| |
| 980W AC-DC power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 60-50Hz, 14-6 Amp
|
| +5V standby |
|
| +12V |
|
| |
| |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
|
| |
| Environmental Spec. |
- Operating Temperature: 10º to 35º C (50º to 95º F)
- Non-operating Temperature: -40º to 70º C (-40º to 158º F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
|
(877) 412-5800