 |
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core
or Dual-Core,
with 667 / 1066 / 1333
MHz FSB
2. Up to 32GB 533MHz SDRAM
Fully Buffered DIMM
3. Left Universal Slot:
1 64-bit 100MHz PCI-X OR
1 (x8) PCI-Express
4. Right Universal Slot:
1 64-bit 133MHz PCI-X OR
1 (x8) PCI-Express
5. Intel® (ESB2/Gilgal) 82563EB Dual-port
Gigabit Ethernet Controller
6. Zero Channel RAID Support
7. 4 x 3.5" Ultra320 SCSI Hot-swap
Drive Bays with SAF-TE
8. 700W Redundant High-efficiency
Power Supply
|
|
|
|
| |
| SYS-6015P-8R |
- SuperServer 6015P-8R (Beige)
|
| SYS-6015P-8RB |
- SuperServer 6015P-8RB (Black)
|
| |
| |
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5300
sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz
|
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
| |
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667/533MHz FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
|
| Memory Type |
- 667/533MHz FB-DIMM (Fully Buffered DIMM) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
| |
| Chipset |
- Intel® 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SCSI |
- Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10 support
|
| RAID |
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR1 or AOC-LPZCR2 or AOC-LPZCR3
- RAID 0, 1, 5, 10
- Optional: (Card NOT included)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIM1U)
- (Optional: AOC-SIM1U-3B(+) and AOC-SIM1U-3D)
|
| Network Controllers |
- Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
| |
| Left Universal Slot |
- 1 (x8) PCI-e slot OR
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| Right Universal Slot |
- 1 (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X (3.3V) slot
|
| IPMI |
- 1 SIM1U Slot (IPMI 2.0)
(Supermicro Intelligent Management)
|
| |
| |
| IDE |
- Single EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers, 1 dual, 1 single
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 2 Fast UART 16550 serial ports
|
| |
|
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
|
| Ports |
|
| |
| |
| Hot-swap |
- 4x 3.5" Hot-swap Ultra320 SCSI drive bays
|
| |
| |
| Floppy |
- 3.5" 1.44MB Slim Floppy Drive
|
| DVD-ROM |
|
| |
| |
| 1x SCA814S 1U SCSI Backplane w/ SAF-TE |
| |
| |
| Fans |
- 4x 6-pin Counter-rotating Cooling Fans
|
| |
| |
| (1 + 1) Redundant 700W AC power supply with PFC |
| AC Voltage |
- 100 - 240V, 50-60Hz, 9.5-4.5 Amp
|
| +5V standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
| |
| |
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby, VBAT
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
|
| FAN |
- Total of ten proprietary fan headers for up to ten fans
- Ten fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
| |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
|
| |
| Environmental Spec. |
- Operating Temperature: 10º to 35º C (50º to 95º F)
- Non-operating Temperature: -40º to 70º C (-40º to 158º F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
|
(877) 412-5800