 |
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core
or Dual-Core,
with 667 / 1066 / 1333
MHz FSB
2. Up to 32GB DDR2 667 & 533 SDRAM
Fully Buffered DIMM (FB-DIMM)
3. Left Slot (Full-height / Full-length):
1 Universal I/O (UIO) AND
1 (x8) PCI-Express
4. Right Slot (Low-Profile):
1 64-bit 133MHz PCI-X OR
1 (x8) PCI-Express
5. Intel® (ESB2/Gilgal) 82563EB Dual-port
Gigabit Ethernet Controller
6. 4 x 3.5" Hot-swap Drive Bays
For customizable Storage
7. 650W Redundant High-efficiency
Power Supply
|
|
|
|
| |
| SYS-6015B-URV |
- SuperServer 6015B-URV (Silver)
|
| SYS-6015B-URB |
- SuperServer 6015B-URB (Black)
|
| |
| |
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5300
sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz
|
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| |
| |
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512 MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| |
| |
| Chipset |
- Intel® 5000P (Blackford) chipset
- ESB2
|
| Clock Generator |
|
| SATA |
- Intel SB SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO)
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers |
- Intel® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Super I/O |
|
| |
| |
| Serial ATA |
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
| Parallel Port |
- 1 ECP / EEP parallel port
|
| |
|
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- System Reset button
- UID Button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Universal Information (UID) LED
|
| Ports |
- 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
|
| |
| |
| Left Universal Slot |
- 1 Unversal I/O (UIO) Slot AND
- 1 (x8) PCI-e Slot
|
| Right Universal Slot |
- 1 64-bit 133MHz PCI-X Slot OR
- 1 (x8) PCI-e Slot
|
| UIO |
- 1 Universal I/O (UIO) slot (Left Side)
|
| |
| |
| Hot-swap |
- 4x 3.5" SATA Hot-swap drive trays
|
| |
| |
| DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
| |
| |
| 1U SATA / SAS Backplane w/ SES2 Enclosure Management |
| |
| |
| (1 + 1) Redundant 650W AC power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 60-50Hz, 8-4 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
|
| |
| Environmental Spec. |
- Operating Temperature: 10º to 35º C (50º to 95º F)
- Non-operating Temperature: -40º to 70º C (-40º to 158º F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
|
(877) 412-5800